China Towel Trading Network teaches you towel knowledge

Soft towels do not necessarily represent good quality towels. When many companies make towels, they use cotton and fiber line synthesis, usually glue. The company felt that the towel was soft after using the adhesive, but it seriously affected the water absorption. If you see 100% cotton (PK) on the label, then you should know that this is also a synthesis. After you buy it and take it home, you can check whether the fabric of the towel has a synthetic thread.

We can do an experiment. Pour about 5 ml of water on the surface of the glass and wipe the surface of the glass with a towel. If there is water on the glass surface after rubbing the glass, the towel is not pure cotton.

Generally speaking, the service life of the towel is less than three years, depending on the density of the towel, and the density of the towel should be no less than 450 grams. Density indicators are generally not indicated on the towel label. People can judge the density of towels by other indicators. For example, a 70 x 140 cm towel, if weighing 490 grams, has a density of about 500 grams per square meter.

The length of the towel should not exceed 8 mm, and should not be shorter than 3.5 mm. Why? The long fluffy towel looks good and feels high density, but once washed, it is easy to see how the towel looks old. Too short a water absorption is not good, and it feels very hard and uncomfortable when rubbing the skin with a short velvet towel. Therefore, the optimum length of the towel fluff is 5 mm, and the towel produced according to this standard is more durable.

The above is published by the China Towel Trading Network.