Method of wearing pearls
Pearl is an ancient organic gem. It is mainly produced in pearl shellfish and mother-of-pearl mollusks; and the calcium carbonate-containing mineral (aragonite) beads produced by endocrine action are composed of a large number of tiny aragonite crystals. So what is the way to wear pearls? Xiaobian to teach you. First, use a high-toughness line and select the line model according to the aperture of the pearl (this is very important) Second, fold the thin copper wire 6cm in half, and take the appropriate length for the thread, which is twice as long as the length of the pearl (the long line is for the step of knotting), the two ends are tied together, and then the copper wire is stuck with each other. live. Third, the pearls are large in the middle, arranged on both sides, and then finished with copper wire. The pearls are all worn on the line. When the pearls are worn, the threads are tied to the buttons. Fourth, the most critical step, from the end of the button, in turn, a knot between each pearl, so that each pearl has a fixed position, can not be too tight, can not be too loose, the knotting effect will The whole string of pearls can be bent softly. If the model of the line is not correct, it will result in the knot not being fixed. The specific method of knotting is difficult to describe. It is best to demonstrate it by hand. After the knot is finished, the rope is tied to the other end of the button and it is completed. Velour Knit Fabric,Velvet Knit Fabric,Knitted Velvet Fabric,Velvet Jersey Fabric Shaoxing Lenore Textile Co.,Ltd , https://www.lenoretex.com